Why Land Surveying Can Pick The Best Spot To Build A New Home

Land surveying is typically used to determine property lines and boundaries. However, land surveying can accomplish several other tasks, such as finding a good spot to drill for oil or where you might expect to find water if you need to dig a well. Land surveying can also help find the best spot for constructing a brand new home on a vacant lot. Here is why a land surveyor can do that, and why you and your construction contractor definitely will want the land surveyor to do that.

The Land Surveyor Spots Unsteady Ground

Land surveyors are able to spot places where the ground is not so stable, solid, or steady. For example, they are trained to recognize soft, loamy soil, sandy soil areas, and places where sinkholes are very likely to open up. They can recognize geological features that present with questionable soil and land mass areas, which are locations where you definitely do not want to build a house. Some people have built homes over sinkholes, an unwise decision to be sure, and have subsequently suffered the consequences later. Sandy or loamy soil is a pain to excavate, and worse still, your home will need a lot of reinforcements in the foundation and walls. That all translates into thousands of dollars more than you want to spend. You can avoid that by following a surveyor's recommendations and locating your home on the property in a different spot.

The Land Surveyor Spots Fault Lines Too

In California and along the West Coast area, surveyors are trained to spot fault lines from above ground. This allows them to alert construction contractors and consumers to the fact that the land they purchased is very near these fault lines and may incur some earthquake activity. Knowing that helps the construction workers reinforce anything built there and warns the property owners that they may experience earthquake activity. 

The Land Surveyor Spots Hard Rock Areas

When the ground has a lot of hard, rocky terrain, it may be very difficult to excavate from the standpoint that the contractor has to use a jackhammer to break up rocks before getting further down into the ground. That requires extra equipment, extra labor hours, and extra money. If you know exactly where all of the rocks are and where it might be easier to build a house, then your contractor can build on that spot and avoid the rock issue altogether.

For more resources, visit a site like http://www.communitysciences.com.


Share