Pros And Cons Of Using Bricks For Construction

Are you interested in using bricks for your construction project, but are not sure if they will match your project requirements? Then take the time to learn their pros and cons – by doing so you can make an informed decision regarding if they are a good choice for you. With that thought in mind, here are the advantages and disadvantages of using bricks for construction projects:

Pros Of Using Bricks In Construction

To find to why so many project designers opt for a brick based building read the following points:

  • No paint required: A brick based wall does not require any paint to be applied, which means a long lifetime can be achieved without the need for much maintenance. The only maintenance that will be required is a high pressure water spray a few times a year to clean dirt.
  • Fire resistant: Bricks are one of the most fire resistant materials out there. Fire bricks, for example, can withstand temperatures of up to 1648 degrees. This property is important because a building must be designed with safety features in mind, not just the aesthetic ones.
  • Atmosphere resistant: Mud bricks can be used when there is a lot of moisture in the climate. The variations of cold and moist weather can typically cause the formation of cracks that end up propagating. However, with mud bricks this will not be the case.
  • Thermal mass: Bricks add a lot of thermal mass to a building, which means it can achieve higher levels of insulation. Therefore, during the winter months less heating will be required, and during the summer months less air conditioning.

Disadvantages Of Using Bricks for Construction

To figure out the negative points of bricks read the following points:

  • Shifting foundations: A brick wall does not handle shifting foundations very well. Therefore, in the event of a minor earthquake, or a foundation that moves over the span of 10 years, cracks in the brick wall could begin to form.
  • Manpower: Bricks have to be laid one by one, which requires more manpower working for longer hours than with other construction materials. For example, insulated metal sheets can be installed by just a few operatives over the course of a day, and the wall will be completed by the end of that day.
  • Inconsistent quality: The quality of the wall will depend on the quality of the bricklayer. If the bricklayer is having a bad day, then certain parts of the wall might have a lower level of quality than is expected. To learn more about construction, contact a business like Lugbill Construction Co.

Share